TORCH FURNACE CO.,LIMITED

U Type Silicon Carbide heating Element Description：

U Type Silicon Carbide heating Element Torch Furnace silca U Type Silicon Carbide heating Element is manufactured by taking two carefully-matched SiC rods and welding a thickened silicon carbide bridge.

 

Torch Furnace silca U Type Silicon Carbide heating Element is manufactured by taking two carefully-matched SiC rods and welding a thickened silicon carbide bridge. This element provides for wiring both tail ends from one side of the furnace. The tail ends of the cold ends are metallized with aluminum, which can provide a low-resistance contact surface to the aluminum connection strap and clamp.

The U type Torch Furnace silicon carbide heating elements is manufactured by taking two carefully-matched SiC rods and uniting them with a silicon carbide bridge. These elements provide for wiring both terminals from one side of the furnace. Ideal for drop-through designs, radiant tube systems or where one element will not span the heating chamber. For maximum performance up to 1600 deg C.

This type is “U”-shaped, consisting of a combination of one each of the hot zone rod and cold zone rod respectively. It is a single-phase heating element with both cold ends in one direction, facilitating increased furnace design flexibility, because connection terminals can be centered on one side. In addition, a furnace with an energy saving structure can be built because the number of heating element holes on the furnace can be reduced compared with the U types.

Torch Furnace Silicon carbide SiC heating elements, composed of high-purity, recryTorch Furnacellized silicon carbide, have earned the reputation as the world’s leading heating elements. These elements are widely used as high-temperature heat sources for electric furnaces and for the firing of ceramic capacitors, ferrites and  other  electronic components,